About stainless steel plate: we are now very rare original steel plate, but because of its large volume, high cost, pickling difficulty, not easy to transport and other reasons, the market is more commonly seen by the stainless steel roll flat stainless steel plate.

Commonly used stainless steel plate is divided into two categories:

Stainless steel plate width classification

1, cold rolled stainless steel plate coil plate and coil plate flat plate.
A, stainless steel coil plate is divided into 1 m,1.219 m plate surface, 1.5 m plate surface.
B. The common size of stainless steel plate is 1 m *2 m, 1.219 m *2.438 m

2, hot rolled stainless steel plate is divided into coil plate, flat plate and hot rolled plate.
A, stainless steel coil plate commonly used surface is 1.5 meters, 1.25 meters
B, stainless steel plate plate common size 1.5*6 m, 1.8*6 m, 1.25*6 m.

Commonly used stainless steel plate material proportion

The theoretical calculation formula of stainless steel plate:

Theoretical weight (kg) = Length (m) * Width (m) * Thickness (mm) * Specific Gravity (density)

Flat plate price: coil price * actual thickness/theoretical thickness + flat fee

Example of plate volume price conversion:

The actual thickness of a standard thickness of 2 mm stainless steel plate is 1.8 mm, so the theoretical weight of 2 tons of stainless steel plate is 1.8 tons. If the adjustment price is 11400 yuan/ton, the weighing price is about (2/1.80) *11400=12650 yuan/ton, (weight negative tolerance (1.80-2) /2*100%=10%, 11400/ (1-9%) =12650 yuan/ton) general volume price is weighing, the price is high; Board price is adjusted, than the pound weight, the price is lower than the pound price. (general business will use this way of settlement, because the general stainless steel plate will have 5% of the difference, and some will even reach 30%, so the price of the weight will generally be very high).

Common cold rolled stainless steel plate size

Commonly used hot rolled stainless steel plate plate size

Stainless steel calculation type

1, cost = real thick ÷ thick * in price + freight + processing fees

2, coil plate price switch to plate price = volume price * solid thickness/thickness + flat fee 100

3, flat plate price switch to coil plate price = board price * management thickness/solid thickness – flat fee 100

4. Reel length = net reel weight /7.93/ reel width/actual thickness

5, the algorithm of price with tax = total weight of goods /1.04(1.04 represents 4 points -1.07 means 7 points) example :10000 tons of goods /1.04=9615.3846 tons * ton price = results example :1 ton of goods =15800 tons /1.04=15192.3077 price without tax

6. Given the volume weight and price, find the total weight of the volume = volume weight * price

7, stainless steel plate thickness χ wide χ long χ 7.93 such as 2.0 χ 1.22 χ 2.44 χ 7.93=47.2kg/ piece

8, STAINLESS steel tube (OD – wall thickness) χ 0.02491 such as (57-3.5) χ 3.5 χ 0.02491 = 4.66kg/ m

9, stainless steel round steel diameter χ diameter 0.00623 such as 18 χ 18 χ 0.00623 = 2.02kg/ m

10, stainless steel Angle bar length Χ side Χ Χ Χ as 40 Χ 40 Χ 7.8 0.000198 7.8 0.000198 = 2.47 kg/m thick) (+ edge width – while Χ edge thick Χ 0.00793 (40 + 40-3) Χ Χ 0.00793 = 1.83 kg/m 3

11, stainless steel flat steel thickness χ width 0.00793 such as 8 χ 80 χ 0.00793 = 5.08kg/ m

12, stainless steel square tube (3.14 – thickness side wide Χ 4 present) Χ thickness Χ 0.02491 if (40 Χ 4 present 3.14-3) Χ Χ 0.02491 = 3.58 Kg/m 3

Hexagonal steel χ χ χ 0.0069

14, square steel edge width χ edge width χ 0.00793 in addition to the length and width of the board in meters, other specification units are mm